The XCI-V3 offers high-speed acquisition with VGA resolution.

The XCI-V3 is a complete PC with a high-end CCD camera in a small, networkable package. It incorporates a 1/3-type VGA B&W progressive scan CCD, a high performance AMD Geode GX533 processor, 256MB SDRAM and comes with a choice of Linux® or Windows® XPe operating systems. Software Support includes Scorpion Vision Software.

• SENSOR BLOCK Image device 1/2-type progressive scan
• IT monochrome CCD Effective resolution (H x V)
• 640 x 480 (VGA)
• Cell size (H x V) 4.65 x 4.65 µm
• Frame rate 60 fps
• Gain control Manual (0 to +18 dB, 1 dB steps)
• Electronic shutter 2 to 1/50,000 s (trigger mode), 2 to 1/100,000 s (free run mode)
• Binning function Vertical / Horizontal binning
• Partial scanning function
• Vertical random scanning 32 to 1,024 lines, 32 line steps Horizontal random scanning 384 to 1,280 pixels, 128 pixel steps
• Typical frame rate 34 fps (VGA), 21 fps (XGA)
• External trigger input pulse-edge detection mode/pulse-width detection mode
• Trigger delay function 0 to 4 s, 1ms steps
• External trigger latency less than 10 us
• Hardware Look Up Table
• Gamma compensation, binarization, negative/positive reverse, etc.
• PROCESSOR CPU x 86, AMD Geode GX533, 400 MHz Memory 128 MB DDR-SDRAM 128 MB
• Compact Flash Operating systems
• Monta Vista Linux Professional edition 3.0, Microsoft Windows embedded INTERFACES
• Ethernet 10Base-T/100Base-TX (Network protocols: TCP/IP (IPv4), HTTP, FTP)
• Monitor output D-sub 15pin for multi scan monitor
• USB version 1.1
• Serial interface RS-232C
• Digital I/Os TTL IN/OUT, Isolated IN/OUT, Trigger IN, Exposure OUT
• GENERAL Lens mount C-mount Minimum illumination 4 lx (F1.4, +18 dB gain)
• Power consumption 7.8 W
• Power requirements 10.5 to 26.4 V
• Dimensions (W x H x D) 55 x 55 x 110 mm (2 1/4 x 2 1/4 x 4 3/8 inches)
• Mass 400 g (14 oz) Operating temperature -5 to +45 ºC (23 to 113 ºF)
• Storage temperature -30 to +60 ºC (-22 to +140 ºF)
• Operating humidity 20 to 80% non condensing
• Storage humidity 20 to 95% non condensing
• Vibration 10 G (20 to 200 Hz)
• Shock resistance 70 G Regulations FCC / CE / IC / VCCI Class A
• Supplied accessories: Lens mount cap, Operating instructions