You are here: Catalogue Index : Illumination : High Output LED Diffuse Ring Light Panels
 

SmartVision High Output LED Diffuse Ring Light Panels - SMVDLPW-300x300-WHI - 300mmx300mm active area LED Diffuse Ring Light Panel White 12inchx12inch Washdown

  • Product Code: SMVDLPW-300x300-WHI

 

SmartVision High Output LED Diffuse Ring Light Panels - SMVDLPW-300x300-WHI - 300mmx300mm active area LED Diffuse Ring Light Panel White 12inchx12inch Washdown
  • Price (excl. VAT):

DLP Series – Light Tent or Dome Type of illumination
Washdown

• 300mm x 300mm (12″ x 12″)

• Large LED Diffuse Ring Light
• PNP and NPN Strobe input
• Continuous operation or Strobe mode
• Built in SMART driver – No External Driver needed
• IP68 Standards – Meets FDA Compliancy
• Designed to operate in food applications
• Stainless Steel 316 Housing
• M12 Quick Disconnect

Electrical Input:  Voltage - 24 VDC +/- 5% Maximum 75 Watts
Analog Intensity:  The output is adjustable from 10-100% of brightness by a 0 -10 VDC signal
Continuous Mode:  Light will be in continuous mode by leaving signal on strobe input.
Strobe:  PNP ? +5VDC or greater to activate.  |  NPN ? GND (<1VDC) to activate
Strobe Mode:  The Light will operate in either continuous or strobe mode. In strobe mode, the output pulse width will track the pulse width of the strobe pulse.


Wiring:

Smart Vision Lights cables are 5 conductors M12 in 18AWG wire. 18AWG is recommended for ALL OverDrive series and standard series lights. 18AWG is necessary to strobe lights at full current. Common M12 cables are 22AWG. Standard 22 AWG wires will not supply full power needed for our light. Smart Vision Lights recommends the cable from the power supply to the light be kept to a minimum.



• 5 pin Standard M12 mating cable must be used.
• 0 – 10 VDC Analog controls intensity of light from 10-100%. 0VDC = 10%, 10VDC = 100%
• PNP and NPN strobe – In strobe mode the light output will track the pulse width of the strobe input.
• Continuous mode – Leaving the NPN or PNP strobe signal in an active ON state.


Mounting:

Mounting for the DLP Series Light Tent or Dome Type of illumination, consist of the Threaded Inserts in aluminium frame and M5 Screws.





Related Products

This product has no related products.